Exhaust S-Bend Assortment - 2.50 in. Tubing Various Offsets - Set of 6
Mandrel bent S-shape pipes developed to simplify the routing and fabrication of exhaust pipes from headers to muffler. Deep slip fit on single end of pipe(s). Available in various sizes.
Mandrel bent S-shape pipes developed to simplify the routing and fabrication of exhaust pipes from headers to muffler. Deep slip fit on single end of pipe(s). Available in various sizes.
- Includes (2) Each of 4.00-inch, 6.00-inch and 8.00-inch Offsets
- 2.50-inch Tubing Approximately 36-inches in Length
- Mandrel-bent 16 Gauge Aluminized Steel Tubing
- Great for Dual Exhaust System Fabrication
Information:
Universal Item - Not a direct fit. Some adaptation required.Application Summary:
| Year | Make/Model |
|---|---|
| Universal | Item - Not a direct fit. Some adaptation required. |
| Attributes | |
| ASIN | B0002Z9N74 |
| Bend Angle | S-Pipe |
| Brand | Flowmaster, Flowmaster |
| Bullet Point #1 | Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 | 2.50 in. tubing approximately 36 in. length |
| Bullet Point #3 | Great for exhaust system fabrication |
| Bullet Point #4 | Includes 2 each of 4.00 in. 6.00 in. 8.00 in. offsets |
| California Proposition 65 | No |
| Category | Exhaust, Exhaust |
| Center Line Radius | N/A |
| Clamping Type | U-Bolt |
| Clamps Included | No |
| Color | Gray, Gray |
| Country of Origin (Primary) | US |
| Diameter Outside (in.) | OEM |
| Emission Code | 5, 5 |
| Finish | Aluminized |
| Flanged Inlet | No |
| Gasket Or Seal Included | No |
| Gauge | OEM |
| Grade Type | Performance |
| Harmonized Tariff Code (Schedule B) | 8708925000 |
| Hazardous Material Code | N |
| Inlet Inside Diameter | 2.500 in., 2.50 |
| Inlet Inside Diameter (in.) | 2.5 |
| Inlet Outside Diameter | 2.625 |
| Leg/Straight Length | N/A |
| Length | ~36.00 |
| Life Cycle Status Code | Available to Order |
| Main Piping Diameter | 2.50, 2-1/2 |
| Material | Aluminized Steel, Aluminized Steel |
| NAFTA Preference Criterion Code | B |
| Outlet Inside Diameter | 2.375 |
| Outlet Outside Diameter | 2.50 |
| Part Type | Exhaust Pipe |
| Pipe Diameter | 2.50 |
| Pipe Material | Stainless Steel |
| Position | N/A |
| Primary Tube Dia. | 2-1/2 inch, 2-1/2 inch |
| Product Type | Exhaust Accessories, Exhaust Accessories |
| Quantity | 1 |
| SDR Required Flag | N |
| SDS Sheet Number | N |
| Series | Builder Accessories |
| Sheen Level | Flat |
| Sub Category | Exhaust and Tail Pipes |
| Subcategory | Miscellaneous Exhaust |
| Tube Diameter | 2.500 in. |
| Tube Material | Aluminized Steel, Aluminized Steel |
| Tube Size | 2.5 |
| Tubing Diameter | 2.500 in., 2.50 |
| Tubing Diameter (in) | 2.5 |
| Warranty Time | 36 |
| Welded Hanger | No |
| GTIN | 00700042016631 |