Fits 1963-1966 GM C10/1000 Series V8 Truck, 2WD Short and Long Bed, 2.5" 409 Stainless Steel, Dual Exit
This American Thunder exhaust system is specifically designed for 1963-1966 Chevrolet C10 and GMC 1000 series 2-wheel drive, non X-Frame V8 trucks without the torsion bar front suspension. The system is perfect for the person looking for an aggressive to moderate exterior and interior sound level. Starting just after factory manifold downpipes or a set of headers, this exhaust system comes complete with a built-in H-pipe crossover and all mandrel bent 2.50-inch 409 stainless steel tubing that helps maximize the flow of the exhaust pulses for better performance and the added durability of stainless steel. The Super 44 Series performance mufflers will give any V8 a deep rumble with that classic Flowmaster tone. This system comes with your choice of three tailpipe exits, straight out the rear, side exit behind each rear tire, or dumped behind the rear tires. The system includes all hardware necessary for an at home installation. This exhaust system is covered by our Lifetime Limited Warranty. Fits both short and long wheelbase trucks.
- 3 Exit Options Allow You to Customize the Look of Your Truck
- 2.5-Inch Mandrel Bent Tubing Improves Exhaust Flow for Better Performance
- Super 44 Series Mufflers Give You a Deep, Classic Muscle Truck Sound
- H-Pipe Style Crossover Pipe Improves Performance and Reduces Interior Sound
- Includes all Necessary Hangers and Hardware for an at Home Installation
- 409 Stainless Steel Construction adds Corrosion Resistance and Durability
- Fits both Short Bed and Long Bed Trucks
- Backed by Flowmaster’s Lifetime Limited Warranty
Information:
Fits Both Long And Short Wheelbases
Does Not Fit Trucks with Torsion Bar Front Suspension or X-Frames
Application Summary:
| Year |
Make/Model |
| 1963-1966 |
Chevrolet C10 Pickup |
| 1966 |
GMC 1000 |
| 1963-1965 |
GMC 1000 Series |
| Attributes |
| Brand |
Flowmaster |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust Tip Quantity |
Sold Separately |
| Exhaust Type |
Header-Back |
| Exit Position |
Dual Rear, Dual Out Rear / Dual Out Side |
| Finish |
Natural, Natural |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Type |
Clamp-On, Weld-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
409 Stainless Steel |
| Mount Type |
Uses Factory Hangers, Uses Factory Hangers |
| Mounting Bracket Included |
Yes, Yes |
| Muffler (Left) Body Length |
13.25 |
| Muffler (Left) Body Width |
9.50 |
| Muffler (Right) Body Length |
13.25 |
| Muffler (Right) Body Width |
9.50 |
| Muffler Body Length |
13.25 |
| Muffler Body Length (in) |
13 |
| Muffler Body Material |
409 Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Body Width |
9.50 |
| Muffler Color |
Black, Black |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler inlet Diameter |
2.50 |
| Muffler Inlet Diameter (in) |
2.5 |
| Muffler Inlet Inside Diameter |
2.50, 2.50 |
| Muffler Inlet Location |
Offset, Offset |
| Muffler Inlet Outside Diameter |
2.63, 2.63 |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet Diameter |
2.50, 2.50 |
| Muffler Outlet Diameter (in) |
2.5 |
| Muffler Outlet Location |
Offset, Offset |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Overall Length |
19.00, 19.00 |
| Muffler Overall Length (in) |
19 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
2, 2 |
| Muffler Series |
Super 44, Super 44 |
| Muffler Shape |
Oval |
| Muffler Type |
Chambered, Chambered |
| NAFTA Preference Criterion Code |
B |
| Part Type |
Exhaust System |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust System, Exhaust System |
| SDR Required Flag |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Sound Level |
Aggressive / Moderate, Aggressive / Moderate |
| Spring Bolt Kit Included |
No, No |
| Subcategory |
Complete Exhaust Kits |
| System Type |
Crossmember-back |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tail Pipe Quantity |
2, Dual |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Shape |
Round |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (in) |
2.5 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Type |
Crossmember-back, Crossmember-back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| GTIN |
00090127100523 |
