2011-2014 Dodge Challenger SRT8
The Hurst® Roll/Control®, Line/Loc® for your 2011-2014 Dodge Challenger SRT8 is primarily used in drag racing to lock the front wheels allowing for more consistent burnouts when heating up the tires to make a pass. This kit comes with all the necessary parts needed to easily install a Hurst Line/Loc system on your Challenger SRT8. Includes a stainless steel Roll/Control valve, brake line, fittings, lighted momentary switch, bracket, wiring and much more. Rigorous testing has proved a 1/100,000 of a second release time and vibration tests have seen up to 30 G's applied without mechanical failure. Adaptable to most domestic and import hydraulic brake systems. Advanced quality design stainless steel valve assembly for ultimate corrosion resistance. Fully enclosed epoxy molded electrical coil for reliability. Attractive finned aluminum housing helps dissipate heat. Wider lightweight base provides better mounting stability 150 micron screen filtered ports to prevent contamination. Field serviceable for cleaning or rebuilding. Extra threaded port for separate bleeder or brake line pressure gauge Kit includes solenoid valve, snap-action switch, indicator light, 4-amp fuse, mounting screws and installation instructions. Note: Not recommended for use as a parking brake, or for longer then 60 seconds maximum at any one time.
- Extra Threaded Port for Separate Bleeder or Brake Line Pressure Gauge
- Stainless Steel Valve Assembly for Ultimate Corrosion Resistance
- 150 Micron Screen Filtered Ports help Prevent Contamination
- Can be Used to Hold Brakes for Up to 60 Seconds Maximum
- Attractive Finned Aluminum Housing Helps Dissipate Heat
- Field Serviceable for Cleaning or Rebuilding
- Fully Enclosed, Epoxy-Molded Coil
Information:
Fits 2011-2014 Dodge Challenger SRT8
Application Summary:
| Year |
Make/Model |
| 2011-2014 |
Dodge Challenger |
| Attributes |
| Additional Contents |
Arming switch, fuse, momentary switch, fittings, intermediate brake lines, solenoid, wires, wire cover, bracket, wire connectors and mounting screws, Arming switch, fuse, momentary switch, fittings, intermediate brake lines, solenoid, wires, wire cover, bracket, wire connectors and mounting screws |
| Amp Draw |
4 |
| Amp Rating |
4, 4 |
| Amperage Draw |
4 |
| ASIN |
B00861JRC2 |
| Automotive Item Grade |
High Performance, High Performance |
| Brand |
Hurst, Hurst |
| Bullet Point #1 |
Roll Control complete kit |
| Bullet Point #2 |
Locks front brakes |
| Bullet Point #3 |
Used in drag racing |
| Bullet Point #4 |
Durable |
| California Proposition 65 |
Yes |
| Category |
Brake |
| Country of Origin (Primary) |
CN |
| Emission Code |
5, 5 |
| Harmonized Tariff Code (Schedule B) |
8481200020 |
| Hazardous Material Code |
N |
| Indicator Light Included |
Yes |
| Inlet Port Gender |
Female, Female |
| Inlet Ports |
1, 1 |
| Inlet Thread Size |
1/8", 1/8" |
| Inlet Thread Type |
1/8 in. |
| Installation Hardware Included |
Yes, Yes |
| Life Cycle Status Code |
Available to Order |
| Lighted Switch |
Yes, Yes |
| Material |
Stainless Steel, Stainless Steel |
| Mounting |
Screw-On |
| Mounting Method |
Screw-On, Screw down |
| NAFTA Preference Criterion Code |
B |
| Outlet Port Gender |
Female, Female |
| Outlet Port Quantity |
3 |
| Outlet Ports |
3, 3 |
| Outlet Size |
0.125 in. |
| Outlet Thread |
1/8 in. |
| Outlet Thread Size |
1/8", 1/8" |
| Part Type |
Brake Hydraulic Line Lock Kit |
| Port Quantity |
1 |
| Product Type |
Brake Line Lock Kit, Brake Line Lock Kit |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Sub Category |
Service Kits |
| Switch |
Activation/Engagement Switch, Activation/Engagement Switch |
| Switch Actuation Type |
Push Button, Push Button |
| Switches |
Activation/Engagement Switch |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
90 |
| GTIN |
00084829012420 |
