K&N's easy-to-install Typhoon cold air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a silver powder coat finish.
The K&N 69-7080-1TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Infiniti G35 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7080-1TS cold-air intake consists of a K&N high-flow air filter that mounts behind the driver-side wheel well directing cooler outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less.
The K&N 69-7080-1TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Infiniti G35 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7080-1TS cold-air intake consists of a K&N high-flow air filter that mounts behind the driver-side wheel well directing cooler outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less.
- Designed to improve throttle response and engine sound
- Easy to install, usually in 90 minutes or less
- Filter lasts up to 100,000 miles before service is required
- Replaces entire factory air intake system
- Washable and reusable lifetime air filter
- K&N Million Mile Limited Warranty
Application Summary:
| Year | Make/Model |
|---|---|
| 2003-2006 | INFINITI G35 |
| Attributes | |
| Air Box Included | No |
| Air Filter Color | Red |
| Air Filter Element Washable | Yes |
| Air Filter Height | 6.500 in. (165mm) |
| Air Filter Large End Diameter | 6.000 in. (152mm) |
| Air Filter Material | Cotton Gauze |
| Air Filter Oulet Length | 3.000 in. (76mm) |
| Air Filter Oulet Width | 3.000 in. (76mm) |
| Air Filter Outlet Length | 3.000 in. (76mm) |
| Air Filter Outlet Shape | Round |
| Air Filter Outlet Width | 3.000 in. (76mm) |
| Air Filter Washable | Yes |
| Alternate Part Number | 69-7080-1TS |
| ASIN | B001C4SLC2 |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CARB EO Number | D-269-32 |
| Clamp Color | Natural |
| Clamp Color/Finish | Natural |
| Clamp Material | Stainless Steel |
| Clamp Quantity | 5 |
| Clamp Style | Regular |
| Clamps Included | 5 |
| Country of Origin (Primary) | US |
| Coupler Color | Black |
| Coupler Color/Finish | Black |
| Couplers Included | 2 |
| Emission Code | Legal US |
| Estimated Horse Power Gain | 9.5 HP @ 6101 RPM |
| Estimated Horsepower Gain | 9.5 HP @ 6101 RPM |
| Estimated Torque Gain | 8 lbft |
| Filter Color | Red |
| Filter Material | Cotton Gauze |
| Flange Angle | 0 degrees |
| Flange Offset | 0 in (0 mm) |
| Flange Type | Centered |
| Harmonized Tariff Code (Schedule B) | 8421310000 |
| Hazardous Material Code | N |
| Horse Power Increase | 10 HP |
| Intake Pipe Color | Silver |
| Intake Pipe Color / Finish | Silver |
| Intake Pipe Inlet Length | 20.000 in. (508mm) |
| Intake Pipe Inlet Shape | Round |
| Intake Pipe Inlet Width | 3.000 in. (76mm) |
| Intake Pipe Material | Aluminum |
| Intake Pipe Outlet Length | 20.000 in. (508mm) |
| Intake Pipe Outlet Shape | Round |
| Intake Pipe Outlet Width | 3.000 in. (76mm) |
| Item Weight | 8.000 lbs. (3.6 kg) |
| Life Cycle Status Code | Available to Order |
| Mass Air Flow Sensor Adapter Included | Yes |
| Mass Air Flow Sensor Included | Mass Air Flow Sensor Adapter Included When Required |
| Mounting Hardware Included | Yes |
| NAFTA Preference Criterion Code | B |
| Oil Included | Yes, Filter Is Pre-Oiled |
| Package Material | Paperboard |
| Package Type | Box |
| Product Box Height | 12.25 in (311 mm) |
| Product Box Length | 20.25 in (514 mm) |
| Product Box Width | 12.25 in (311 mm) |
| Product Style | 69 Series Typhoon Kits |
| Replacement Filter | RU-4730 |
| RPM | 6101 |
| SDR Required Flag | N |
| Standard Pack | 1 |
| Street Legal | Yes |
| Street Legal In All US States | Yes, Legal for use in all 50 states. |
| System Type | Complete Cold-Air Intake System |
| TUV Approved (Europe) | No, No |
| Warranty | No-Hassle Lifetime Limited |
| Weight | 8 lb (3.6 kg) |
| GTIN | 00024844198433 |